Skip to main content
Food Safety

Approval of active substances, safeners and synergists

Approval of pesticides and herbicides in the EU:

How does it work ?

See our new factsheet.

About Approval

A plant protection product ("pesticide") usually contains more than one component. The component that works against pests/plant diseases is called an "active substance". Active substances can be chemicals or micro-organisms.

Active substances, safeners and synergist can only be approved for use in plant protection products if they fulfil the approval criteria that are laid down in Regulation (EC) No 1107/2009.

You can search here for active substances, safeners and synergists.

The Member States, the European Food Safety Authority (EFSA) and the Commission evaluate every active substance, safener or synergist for safety before it can be placed on the market and used in a plant protection product.

As part of the assessment of active substances, safeners and synergists, it must be demonstrated for at least one use of a plant protection product containing the active substance, and where relevant the safener or synergist, that such use is safe for people's health, including from residues in food, for animal health and must not have any unacceptable effects on the environment before such a substance can be approved. The approvals could be subject to conditions or restrictions. Companies may apply for amendments of conditions of approvals, which follow the same regulatory process.

The initial approval of an active substance, safeners and synergist is valid for a limited period and the approval of these substances need to be reviewed periodically. A renewal of approval is only granted after the substance is re-evaluated and at that occasion, at least one safe use of the substance is demonstrated.

The details of the renewal procedure are set out in Commission Implementing Regulation (EU) No 2020/1740 – that applies as from 27 March 2021 and replaces the previous procedure under Implementing Regulation (EU) No 844/2012.

All approved active substances are listed in Implementing Regulation (EU) No 540/2011 and included, together with safeners and synergists, in the EU Pesticides Database. A Review or Renewal Report is also prepared for each active substance, safener and synergist during the decision-making process, providing details of the evaluation process and outcome. These reports are also available in the database.

Depending on their characteristics, some active substances can be approved as so-called low risk substances or as candidates for substitution.

Once active substances, safeners and synergists are approved, companies can submit in the Member States applications for authorisation for placing on the market and use of plant protection products containing them.

A specific procedure is set out for the approval of so-called basic substances.

Before submitting an application, check whether your substance and its claimed function(s) are falling under the scope of (EC) Regulation No 1107/2009.

Procedural Steps

  1. An application for approval (or amendment of approval) is submitted in accordance with the applicable procedural rules to a Member State (the Rapporteur Member State (RMS)), which may be supported by a co-rapporteur Member State(co-RMS). The producer of an active substance applying for first EU approval can choose the RMS and should contact the national competent authority well before submitting an application. Member States may recover the costs associated with any work they carry out, by means of fees or charges.
  2. Prior to submission of the application, the applicant may request general pre-submission advice from EFSA and the RMS and must notify studies that it commissions or carries out. EFSA recommends submitting the request at least six months before the envisaged submission date of the application. Applicants (and laboratories) must notify information on studies commissioned or carried out to support a future application.
  3. In accordance with Implementing Regulation (EU) 2021/428 (for active substances) and Commission Regulation (EU) 2024/1487 (for safeners and synergists), applications (dossiers) have to be submitted via IUCLID format, which allows to share them with Member States, EFSA and the Commission. Dossiers must comply with the data requirements set out in Regulation EU 283/2013 and its associated Communication and Regulation 284/2013 and its associated Communication, as last amended. For safeners and synergists, dossiers must comply also with the data requirements set out in the Annex III of Commission Regulation (EU) No 2024/1487.
  4. After submission, the RMS verifies if the application is admissible ("admissibility check");
  5. The RMS prepares a draft assessment report (DAR) and delivers it to the European Food Safety Authority (EFSA) for peer-review. If necessary, the RMS can request the applicant to provide additional information during the evaluation. According to the legislation, the RMS has to submit its assessment to the Commission and to EFSA 1-1.5 years after the admissibility of the application for a first approval or 13 months for a renewal of approval. There is a common structure for the DAR/RAR agreed by the EU and OECD. The template can be found on the guidelines webpage;
  6. EFSA coordinates the peer-review process, which begins with a public consultation on the DAR prepared by the RMS. The applicant, EFSA and all Member States also comment on it;
  7. EFSA may organise expert discussion on aspects of the assessment and, if necessary, request the applicant to provide additional information in accordance with the rules laid down in the EU legislation;
  8. EFSA issues its conclusions on whether the active substance, safener or synergist may expected to meet the approval criteria;
  9. Based on the conclusions of EFSA, the assessment of the RMS, and other legitimate factors the Commission puts forward a draft Regulation for approval or non-approval and an accompanying Review Report;
  10. The Standing Committee on Plants, Animals, Food and Feed (ScoPAFF - made up of representatives from each EU Member State) delivers its opinion on the proposal put forward by the Commission;
  11. Following a favourable opinion of SCoPAFF, the Commission adopts the Regulation, which is published in the EU Offical Journal.

According to the timelines set out in Regulation (EC) No 1107/2009, completing the evaluation of applications for first approval of an active substance, safeners or synergist should take between 2.5 to 3.5 years from the date of admissibility of the application to the publication of a Regulation on the approval or non-approval of the active substance, safeners or synergist.

However, experience has shown that the procedure on average takes 4 years .

For renewals of approval, applications must be submitted at the latest 3 years before the expiry of the current approval of the active substance.

In May 2020, the Commission published a report on the evaluation of the EU legislation on plant protection products and pesticides residues.

Safeners and synergists

New legislation to safeners and synergists apply as of 19 June 2024 (Commission Regulation (EU) 2024/1487).

A plant protection product may contain, in addition to the active substance(s) also safeners or synergist.

Safeners are substances or preparations, which are added to a plant protection product to eliminate or reduce phytotoxic effects of the plant protection product on certain plants.

Synergists are substances or preparations which, while showing no or only weak activity as referred to in Article 2, paragraph 1, of Regulation (EC) 1107/2009, can give enhanced activity to the active substance(s) in a plant protection product.

A non-exhaustive list of safeners and synergists contained in plant protection products authorised for the placing on the market in Member States on the date of entry into force of Commission Regulation (EU) No 2024/1487 has been available since 19 July 2024.

Any interested party may submit a notification of further substances or preparations potentially used as safeners or synergists in plant protection products authorised for the placing on the market in at least one Member State on the date of entry into force of Commission Regulation (EU) No 2024/1487 by 19 December 2024. The notification shall be submitted electronically to sante-secteur-pppatec [dot] europa [dot] eu (sante-secteur-ppp[at]ec[dot]europa[dot]eu).

Any interested party wishing to submit an application for the approval of a safener or synergist listed in the non-exhaustive list may submit a request for inclusion of that safener or synergist in the work programme for gradual review by 19 June 2025. The request shall be submitted electronically to sante-secteur-pppatec [dot] europa [dot] eu (sante-secteur-ppp[at]ec[dot]europa[dot]eu).

A work programme, specifying the list of safeners and synergists included and designating for each of them a rapporteur Member State and co-rapporteur Member State will be adopted by 19 December 2025.

An application for the approval of a substance included in the work programme can be submitted to the assigned RMS and co-RMS - via IUCLID format - at any time and not later than 19 June 2028.

Plant protection products containing safeners or synergist, which are included in the work programme, can continue to be authorised for a period of 5 years following the adoption of the work programme.

An application for the approval of a safener of synergist not included in the work programme can be submitted to an RMS - via IUCLID format - at any time. However, plant protection products containing substances not included in the work programme, can only be authorised after the approval of the contained safeners or synergist.

Candidates for Substitution

Active substances with certain properties defined in Regulation (EC) No 1107/2009 are considered as candidates for substitution.

For plant protection products (PPPs) containing these active substances, Member States are required, when assessing an application for an authorisation, to evaluate if they can be replaced (substituted) by other adequate solutions (chemical or non-chemical).

Since 2015, substances that have been approved for the first time, under Regulation (EC) No 1107/2009, or for which the renewal of approval was granted, as candidates for substitution, are listed in Part E of the Annex to Regulation 540/2011.

In time, Part E will identify all substances that are candidates for substitution. Therefore, the first list that identified substances that are candidates for substitution in 2015 will become obsolete.

Currently, Part E and the first list should be considered together for a complete view of the candidates for substitution.

More information on the process for the establishment of the first list of active substances that are candidates for substitution can be found below:

Basic substances

Basic substances are active substances, not predominantly used as plant protection products but which may be of value for plant protection and for which the economic interest in applying for approval may be limited.

Criteria for their approval are laid down and specific provisions are set to ensure that such active substances, as far as they do not have an immediate or delayed harmful effect on human and animal health nor an unacceptable effect on the environment, can be legally used in the EU after having been approved as "basic" under Regulation 1107/2009.

Substances that have been approved as basic substances are listed in Part C of the Annex to Regulation 540/2011 and included in the Pesticides Database. Substances for which the dossier has been considered valid, but the approval is still pending, are also included in this database.

A summary of the approved uses and conditions of approval, such as the purity and the preparation to be used, for a basic substance can be found in the Review Report for each substance. This report is uploaded on the page showing the details of that substance in the database.

Applications concerning basic substances have to be submitted using the IUCLID format via the EFSA submission portal.

The rules governing the procedure of approval apply as set out in the following document: Working document on the procedure for application of basic substances to be approved in compliance with Article 23 of Regulation (EC) No 1107/2009; SANCO/10363/2012 rev.11

In accordance with the provisions set out in the General Food Law, applicants for basic substance approvals may request general and non-committing pre-submission advice from EFSA. EFSA recommends submitting the request at least six months before the envisaged submission date of the application.

Applicants (and laboratories) must submit information on studies commissioned or carried out to support a future application.

Further information on pre-submission advice, notification of studies and on confidentiality can be found in the EFSA Practical Arrangements.

The Commission checks if the applicant has fulfilled all required pre-submission requirements, and has provided all required tests and study reports before confirming that the application is valid.

Renewal of approval

Active substances, safeners or synergists are first approved for up to a maximum period of 15 years (depending on the type of substance). Approval may be renewed for a period not exceeding 15 years upon application.

The rules governing the renewal of approval of active substances have been revised in order to align them with the provisions of the Transparency Regulation

Read more

A non-paper on possible options for obtaining studies submitted in previous dossiers, for use as required under Commission Implementing Regulation (EU) 2020/1740, was endorsed by the Standing Committee on Plants, Animals, Food and Feed in January 2024.

Chlorpyrifos & Chlorpyrifos-methyl

Chlorpyrifos (sometimes referred to as chlorpyrifos-ethyl) and chlorpyrifos-methyl are insecticides used to control insect pests on a range of crops. Chlorpyrifos-methyl is also used to treat stored cereal grain and empty warehouses.

Read more about the approval process.

Glyphosate

Glyphosate is an active substance used in PPPs control plants, which means it's a herbicide

Read more about the approval process.

Neonicotinoids

Neonicotinoids are active substances used in plant protection products to control harmful insects, which means they are insecticides

Read more about the approval process.

Guidelines for preparing applications for the approval or renewal of approval of Active Substances

Technical and Procedural guidance on Active Substances and Plant Protection Products.

Read more